Water Leak auto paint Booth shower auto paint Booth:
USE:The water leak test booth is mainly used to detect the water tightness of the vehicle. Through the shower test booth, the condition of the rainwater detection is similar to the outside natural condition to confirm the watertight state of the auto.
Shower testing booth:
FUNCTION: The water spraying method achieves a certain degree of rain intensity to test the vehicle rain-proof in the different harsh weather conditions. The stainless steel spray nozzles under the certian pressure at the top, sides and even bottom jet the water out to the car. The different pumps are on and off with the independent valves to ensure the enough water pressure to work normally. At the same time, it has a sewage treatment device, and the circulating water is filtered to remove mud sand and impurities so it can reach the standard of circulating water.
Paintcolor water test booth insists on the principle of making an advanced, reliable, economical and practical automotive rain testing booth. In addition, this shower test booth is taken the characteristic into the adequate consideration, and it's actively put to use the state-of-the-art technique and equipment. The ability of testing the water tightness of workpieces is greatly improved, which allows to meet the different technical requirements.
Main Room:
Wall panel: choi steel + polystyrene.
Wall panel vertical type installation, rock wool is optional.
Basement & Intake Fan:
Basement: steel structure, 3 tons rated load.
lntake/Exhaust Fan: the total air flow volume is24000m3/h.Spraying/baking transition damper: cylinder driving mechanism.
Heating system:
Heat ex-changer: made of stainless steel, cycling heating.Burner:RIELLO/G20.
Roof filter: hinged type network installation.
Light system:
Upper light: 8 sets, Side light: 8 sets.
Control box: made of domestic high-quality components.Spraying: with functions of constant temperature spraying.Environmental protection filter: activate carbon as optional.
