Paintcolor-15mx5mx5m SPRAY BOOTH with full down draft dig-pit style spraying booth for buses mini bus spray oven mini bus spray painting baking oven
Bus Spray Booth:
Model:PC-LSP15-B
Features:
1. Inner size: 15m x 5m x 5m
2. Full down draft; dig pit with 2 rows of ventilation grids on the floor
3. Strong structure with section steel reinforced and composite beams
4. Total air inlet volume 60000m3/h
5. Total heating capacity 400,000Kcal
6. Fast paint drying speed,even air flow to ensure nice painting effects.
7. Easy for installation and convenient for maintenance
China Vehicle Spray Booth:
Specification
- Inside Dimension(mm):15000×5000×5000（L×W×H）
- Outside Dimension(mm): 15144×6896×5600mm（L×W×H）
- Front Door Dimension (mm):4000(W) ×4500(H)
- Service Door (mm):700(W) ×2000(H) (two pcs)
- No loading air speed: ≥0.25m/s
- Voltage:380V/50HZ/3P
- Total power: 49KW.
- Max temp.:80°C.
-Main door:
1) Single open 4 leafs folded door. Dimension 4000×4500mm (W×H),
2) Bending frame made by Powder coated galvanized sheet, door made by 70mm thick EPS color steel plate,
Steel colorful sheet double side 0.426mm thick:
3) With squared shaped view window which is Aluminum alloy framed with big hinges.
4) Service door: 2units, 700×2000 (W×H), with pressure locks and square shaped tempering glass windows.
-Cabin System:
1) The booth body adopts the steel frame structure as the framework, and equipped with steel reinforced bar made.
by shaped steel and the composite beam made by shaped steel.
2) Wall panel: 70mm thick heat- insulation EPS colorful steel skin board. Steel colorful sheet double side 0.426mm
thick. Socket type.
3) Roof panel: nice quality galvanized steel plate bending production.
4) The body frame is made of galvanized steel plate.
-Basement:
1) dig-pit:2 rows of pits, each pit with size 13000×840 mm(L×W),
Air Circulation System:
1) The air cabinet is made of coated steel profiles and coated steel plates, double layer galvanized steel covers, inside filled with rock wool insulation protection material
2) Air Inlet Fan: Two units of air inlet system. Totally 4x5.5kw centrifugal fans.
A single fan with air capacity: 15000m3/h /set, model: YDW5.6S, power: 5.5KW/set, 2 sets/unit.
Total air inlet volume: 60000m3/h
3) Air Outlet Fan: Two units of air exhaust systems. Totally 2 x11kw belt-driven centrifugal fans.
A single fan with air capacity: 30000m3/h /set, model: DKF, power: 11KW/set. Motor- outside, 1 set/unit.
Total air outlet volume: 60000m3/h
4) Totally 2 electrical dampers to control the air inlet and exhaust.
5) Exhaust ducts are made by Galvanized steel sheet and flange. Totally 12m air outlet duct, 2 elbows and 2 manual dampers.
- Heating System:
1) Adopt 2 sets of Italian Riello brand G20 diesel burners. Heat capacity: 200,000Kcal/h/set. Total heat capacity: 400,000Kcal/h.
2) Heat exchanger is made of SUS304 stainless steel argon arc weld making. With double layer heat sinks, heat faster.
3) Equipped with 2 sets of electrical damper actuators for spray phase and bake phase alternating.
-Filtration System:
1) Dual filtering structure, the primary filter can capture granules larger than 10 μm.
2) Ceiling high efficiency filter can capture granules bigger than 4μm.
3) With fiberglass filter, M-shaped active carbon filter and single layer drawer type filter glass filter to filter exhausted air.
4) The whole purification system has capacity of large volume of dust. Its filtering rate reaches 98%. Air pressure balance gauge, TSP≤1.4mg/m3
- Light System:
1) Ceiling lamps: 18groups×4 pcs=72pcs, 18W; LED Philip tube;
2) Side lamps: 14groups×2 pcs =28pcs, 18W; LED Philip tube;(left 6 groups, right 6 groups, back 2 groups)
3) All glass is toughened glass,≥800LUX
- Control System:
1) Main electrical components are of famous brand, Switch button type.
2) Spraying, constant temp.Spraying, baking, pre-set time, lighting, Failure indicator; Emergency stop; hour meter, safety thermostat, etc.
